TL431 Shunt Regulator / Output Setting
The most common TL431 circuit: R1/R2 divider sets the output (optimal combination enumerated across E3–E192), plus the series resistor Rs, resistor and TL431 dissipation, and cathode-current checks.
Key points
TL431 Shunt Regulator / Output Setting: The most common TL431 circuit: R1/R2 divider sets the output (optimal combination enumerated across E3–E192), plus the series resistor Rs, resistor and TL431 dissipation, and cathode-current checks. Formula: Vout = Vref × (1 + R1/R2) | Rs = (Vin − Vout)/(Iload + Ika_min + I_sense). Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. Too little sense current gets pulled by the REF pin bias; too much wastes power. 0.25–1mA is typical; for high accuracy use 1% resistors and account for Vref drift. A large capacitor directly across Vout can oscillate; choose it from the datasheet stability-region curve (typically a forbidden zone between 0.1µF and 10µF).
Inputs
Vout = Vref × (1 + R1/R2) | Rs = (Vin − Vout)/(Iload + Ika_min + I_sense)Calculation model (updates with parameters)
| [Divider] R1 (top) / R2 (bottom) | 9.76 kΩ / 9.76 kΩ | actual output 4.99 V | error 0.20% |
| [Divider] alternative 1 | 9.53 kΩ / 9.53 kΩ | Vout 4.99 V | error 0.20% |
| [Divider] alternative 2 | 9.31 kΩ / 9.31 kΩ | Vout 4.99 V | error 0.20% |
| [Divider] sense current | 255.6 µA | ≥0.25mA (≥60× the ≤4µA REF bias) |
| [Limiting resistor] Rs (Vin → Vout) | 619 Ω | ideal 621.9 Ω, nearest standard value |
| [Limiting resistor] Rs dissipation | 79.16 mW | recommend ≥0.25 W package |
| [TL431] full-load cathode current | 1.053 mA | needs ≥ 1 mA to regulate |
| [TL431] no-load max current / dissipation | 11.05 mA / 55.26 mW | package limit 150 mW; add a minimum dummy load if needed |
Engineering notes
- Too little sense current gets pulled by the REF pin bias; too much wastes power. 0.25–1mA is typical; for high accuracy use 1% resistors and account for Vref drift.
- A large capacitor directly across Vout can oscillate; choose it from the datasheet stability-region curve (typically a forbidden zone between 0.1µF and 10µF).
FAQ
- What is TL431 Shunt Regulator / Output Setting for?
- The most common TL431 circuit: R1/R2 divider sets the output (optimal combination enumerated across E3–E192), plus the series resistor Rs, resistor and TL431 dissipation, and cathode-current checks.
- What is the formula for TL431 Shunt Regulator / Output Setting?
- Core formula: Vout = Vref × (1 + R1/R2) | Rs = (Vin − Vout)/(Iload + Ika_min + I_sense). The tool returns results instantly using this formula and the selected parameters.
- What engineering notes should I keep in mind when using TL431 Shunt Regulator / Output Setting?
- Too little sense current gets pulled by the REF pin bias; too much wastes power. 0.25–1mA is typical; for high accuracy use 1% resistors and account for Vref drift. A large capacitor directly across Vout can oscillate; choose it from the datasheet stability-region curve (typically a forbidden zone between 0.1µF and 10µF).
Embed this calculator on your site / blog / intranet
Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.