Skip to main content
DD-CAT IDE logoDD-CAT IDE

PCB Trace Width for Current

Favoriteused 38 times

Work backwards per IPC-2221: from current and allowed rise, find minimum width rounded to 0.1mm.

Key points

PCB Trace Width for Current: Work backwards per IPC-2221: from current and allowed rise, find minimum width rounded to 0.1mm. Formula: A = (I/k)^(1/0.725) | W = A / T. Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. For power mains, double the calculated value; if space is tight, switch to copper pour + via arrays.

Inputs

A = (I/k)^(1/0.725) | W = A / T

Calculation model (updates with parameters)

FR-4 substrateW = 0.8 mmT = 1ozI = 2 Aair side
Minimum trace width0.79 mm
Recommended value (rounded to 0.1)0.8 mm
Required cross-section42 mil²

Engineering notes

  • For power mains, double the calculated value; if space is tight, switch to copper pour + via arrays.

FAQ

What is PCB Trace Width for Current for?
Work backwards per IPC-2221: from current and allowed rise, find minimum width rounded to 0.1mm.
What is the formula for PCB Trace Width for Current?
Core formula: A = (I/k)^(1/0.725) | W = A / T. The tool returns results instantly using this formula and the selected parameters.
What engineering notes should I keep in mind when using PCB Trace Width for Current?
For power mains, double the calculated value; if space is tight, switch to copper pour + via arrays.
ShareWeiboXLinkedIn
Embed this calculator on your site / blog / intranet

Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.