Skip to main content
DD-CAT IDE logoDD-CAT IDE

PCB Differential Pair Impedance

Favoriteused 63 times

Edge-coupled differential impedance from width, spacing, and dielectric thickness; compare to 90/100/120Ω targets with tuning hints.

Key points

PCB Differential Pair Impedance: Edge-coupled differential impedance from width, spacing, and dielectric thickness; compare to 90/100/120Ω targets with tuning hints. Formula: Zdiff = 2·Z0·(1 − k·e^(−c·s/h))|microstrip k=0.48 c=0.96, stripline k=0.34 c=2.9. Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. Iron rule: keep the pair equal-length, equal-spacing, and on the same layer; never cross a plane split; add return vias right next to layer changes. Closer spacing lowers differential impedance (stronger coupling); first set width to approach the single-ended target (about Zdiff/2 plus 10–15%), then fine-tune with spacing.

Inputs

Zdiff = 2·Z0·(1 − k·e^(−c·s/h))|microstrip k=0.48 c=0.96, stripline k=0.34 c=2.9

Calculation model (updates with parameters)

GNDWSth (dielectric)εrZdiff = 91.7 Ωsingle-ended Z0 = 59.8 Ω
Differential impedance Zdiff91.7 Ω
Single-ended impedance Z0 (same geometry)59.8 Ω
Odd-mode impedance Zodd = Zdiff/245.8 Ω
Coupling coefficient k23.4%
effective dielectric constant εeff3.09

Engineering notes

  • Iron rule: keep the pair equal-length, equal-spacing, and on the same layer; never cross a plane split; add return vias right next to layer changes.
  • Closer spacing lowers differential impedance (stronger coupling); first set width to approach the single-ended target (about Zdiff/2 plus 10–15%), then fine-tune with spacing.
  • The formula is the IPC-2141A engineering approximation (±5%); for production impedance boards, have the fab simulate the stack-up and provide an impedance coupon.

FAQ

What is PCB Differential Pair Impedance for?
Edge-coupled differential impedance from width, spacing, and dielectric thickness; compare to 90/100/120Ω targets with tuning hints.
What is the formula for PCB Differential Pair Impedance?
Core formula: Zdiff = 2·Z0·(1 − k·e^(−c·s/h))|microstrip k=0.48 c=0.96, stripline k=0.34 c=2.9. The tool returns results instantly using this formula and the selected parameters.
What engineering notes should I keep in mind when using PCB Differential Pair Impedance?
Iron rule: keep the pair equal-length, equal-spacing, and on the same layer; never cross a plane split; add return vias right next to layer changes. Closer spacing lowers differential impedance (stronger coupling); first set width to approach the single-ended target (about Zdiff/2 plus 10–15%), then fine-tune with spacing. The formula is the IPC-2141A engineering approximation (±5%); for production impedance boards, have the fab simulate the stack-up and provide an impedance…
ShareWeiboXLinkedIn
Embed this calculator on your site / blog / intranet

Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.