Skip to main content
DD-CAT IDE logoDD-CAT IDE

Sallen-Key High-Pass Filter Designer

Favoriteused 72 times

Single op-amp second-order Sallen-Key high-pass: given cutoff and Q, derive standard C/R values, verify the real parameters and plot the response.

Key points

Sallen-Key High-Pass Filter Designer: Single op-amp second-order Sallen-Key high-pass: given cutoff and Q, derive standard C/R values, verify the real parameters and plot the response. Formula: f_c = 1/(2πC√(R1·R2)) | Q = ½·√(R2/R1) with C1 = C2 = C. Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. With C1 = C2, Q depends only on R2/R1; high-pass stages are sensitive to input bias current, so keep R1 moderate.

Inputs

f_c = 1/(2πC√(R1·R2)) | Q = ½·√(R2/R1) with C1 = C2 = C

Calculation model (updates with parameters)

VinC1100 nFC2100 nFR1 (feedback)11.3 kΩR222.6 kΩ+−Voutf_c ≈ 99.59 HzC1 = C2; Q = ½·√(R2/R1) with R2/R1 = 4Q² — a larger ratio raises Q

Bode plot (magnitude / phase, updates with parameters)

High-pass gain |H|-90-80-70-60-50-40-30-20-1000°45°90°135°180°1 Hz10 Hz100 Hz1 kHzf (log axis)dBphase99.59 Hz-3.0 dB90°二阶High通,f_c 处phase 90°;Q=0.71
C1 = C2100 nF
R1 (C1/C2 node → output, feedback resistor)11.3 kΩ
R2 (op-amp + input → ground)22.6 kΩ
Actual cut-off f_c99.59 Hz
actual Q0.707
PeakingNo peak (flattest)
Minimum op-amp GBW7.042 kHz
R2/R1 ratio2.00

Engineering notes

  • With C1 = C2, Q depends only on R2/R1; high-pass stages are sensitive to input bias current, so keep R1 moderate.

FAQ

What is Sallen-Key High-Pass Filter Designer for?
Single op-amp second-order Sallen-Key high-pass: given cutoff and Q, derive standard C/R values, verify the real parameters and plot the response.
What is the formula for Sallen-Key High-Pass Filter Designer?
Core formula: f_c = 1/(2πC√(R1·R2)) | Q = ½·√(R2/R1) with C1 = C2 = C. The tool returns results instantly using this formula and the selected parameters.
What engineering notes should I keep in mind when using Sallen-Key High-Pass Filter Designer?
With C1 = C2, Q depends only on R2/R1; high-pass stages are sensitive to input bias current, so keep R1 moderate.
ShareWeiboXLinkedIn
Embed this calculator on your site / blog / intranet

Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.