Skip to main content
DD-CAT IDE logoDD-CAT IDE

Articles

News & Articles

Product news, technical insights, and industry practices — updated regularly.

Tech Insights

dB Calculator Notes: Power, Voltage, and dBm Conversion and Common Mistakes

When debugging RF and audio systems, I constantly convert between power ratios, voltage ratios, and decibel values. These notes organize the dB formulas, explain the differences among references such as dBm and dBV, walk through the online calculator with a 3× voltage gain example, and summarize common mistakes such as using 10× for power and 20× for voltage.

Read more →

Tech Insights

Centripetal Force Calculator Usage Notes: F=mv²/r Parameter Selection and Common Mistakes

Notes from using a centripetal force calculator (F=mv²/r) to verify a centrifugal fixture on a rotary stage: three common pitfalls—rpm to rad/s conversion, diameter vs. radius, and mass units—plus a hand-calculated 400 N example and a 1.5–2× safety factor recommendation for part selection.

Read more →

Tech Insights

MOSFET Parameter Quick Reference: 8 Formulas Explained with a Water Gate, Plus How to Read the Datasheet

A MOSFET datasheet can run 20 pages, but only a dozen parameters and a few curves truly decide whether a design will work. This article uses a “castle floodgate” analogy to connect threshold voltage, overdrive, R_DS(on), transconductance, Qg, and the Miller plateau into one story, with four hand-drawn figures and 8 formulas. It then walks through a 30 V/5 mΩ example to calculate conduction loss, switching loss, and junction temperature iteration, and closes with three things to read and three to ignore in the datasheet — including the common misreading that a device “rated 60 A” can actually carry only about 20 A.

Read more →

Tech Insights

Kirchhoff's Laws as a Fairy Tale: KCL, KVL, and the Negative Signs of Direction

KCL and KVL are the foundation of circuit analysis, but what actually trips people up is never the formulas — it's reference directions, supply polarity, and knowing when they can't be applied directly. I use a forest water-channel fairy tale to explain the two iron rules: at a splitter post, inflow equals outflow (KCL), and around any loop the water level returns to where it started (KVL). A 12 V/6 V three-branch worked example is then solved by hand to 1.6 A, −1.2 A, and −0.4 A and checked with power conservation, followed by four of the easiest pitfalls to fall into (including why you can't blindly apply KVL to a transformer's magnetic core loop).

Read more →

Tech Insights

Norton's Theorem as a Fairy Tale: A Spring, a Hidden Aqueduct, Two Formulas, and Six Caveats

Norton's theorem is really Thévenin's "parallel sibling," but many people can recite it without being able to use it—and they tend to draw the current-source arrow backwards or actually short a supply to measure Isc. In the second fairy tale set in the same black-box castle, I tie three things together: short the output and gauge the flow to get I_N, dim the lights and gauge the resistance to get R_N, and fold the whole castle into one constant-current spring in parallel with one hidden aqueduct. Then I add the current-division formulas, a numeric trial with a 12 V divider, the interchange with Thévenin, and six field-tested caveats.

Read more →

Tech Insights

Thevenin's Theorem Through a Black-Box Castle: A Fairy-Tale Guide to Vth and Rth, with Derivations and Three Pitfalls

When mentoring newcomers, I repeatedly find that people can recite Thévenin's theorem but can't apply it—open-circuit voltage, the lights-out method for internal resistance, and computing the load after the equivalent are all just moves on paper. I use a fairy-tale black-box castle to tie three things together: measure the water level at the gate to get Vth, put the magic sources to sleep to get Rth, and fold the whole castle into one water pump plus one rough pipe. Then I add why it must hold (the port V-I is a straight line) and the three easiest pitfalls (internal power can't be computed from the equivalent circuit, nonlinearity, and negative resistance).

Read more →